SOMUA S40 2020-05-27

In order to address some of the shortcomings of the S35, SOMUA presented the improved AC5 type in 1939. Based on the SAu 40 chassis and its Char G1-project but with the original width, this SOMUA S40 had a welded ARL 2C turret and redesigned cast superstructure, both to lower production costs and to improve protection standards as the cast sections, delivered by eighteen subcontractors, sometimes were of inferior quality. The new suspension strongly improved the climbing capacity, of which the Cavalry had officially complained in November 1938; its greater weight was compensated by lowering the hull height by fourteen centimetres, causing a weight gain of four hundred kilogram’s. In contrast, the engine deck was raised to fit an improved 230 hp engine, increasing maximum speed to 45 km/h, although the new engine was not yet available in the summer of 1940. The armament and general nominal armour base would remain the same, but first steps to improve these, which might have naturally have evolved into a "S 41", had already been taken in the spring of 1940, when plans were made for a 60 mm welded ARL turret. A first order was on 21 September 1939 made for fifty vehicles, and it was intended to become the main production type, superseding the S 35 from the 451st vehicle with total orders having reached four hundred hulls, but none were completed at the time of the German invasion; the first vehicles were planned to be produced in July; hull sections had already been cast since November 1939. Of the first 160 vehicles eighty had been planned to be made of an intermediate type, with the old turret.

The file contains the unit and pcx files. Model is not my own creation. Wyrmshadow helped with the animation files. I merely put the pieces together and cleaned up the model for CivIII and added some what if pieces. A big thanks to everyone that helped out!