The Type 1 Gun tank Ho-Ni I was a tank destroyer and self-propelled artillery developed by the Imperial Japanese Army for use during World War II in the Pacific theater. It saw limited combat action, being first deployed at the Battle of Luzon in the Philippines in 1945. There were two variant models known as the Ho-Ni II and Ho-Ni III. All three types were only produced in limited numbers.
The Type 1 Ho-Ni I was the first self-propelled gun design of this particular type. They were meant to be self-propelled artillery and tank destroyers for armored divisions. The plan was for the Type 1 Ho-Ni I gun tank to form part of a fire support company in each of the tank regiments. The first conversion took place in June, 1941. Production of the Type 1 Ho-Ni I took place during 1942. The total number of Type 1 Ho-Ni I units produced was only 26.
The Type 1 Ho-Ni I was developed by using the existing Type 97 chassis and engine, and replacing the gun turret with a Type 90 75 mm field gun mounted in an open casemate with frontal and side armour only. The gun could elevate from -5 to +25 degrees; the gun mounting could also traverse up to 20 degrees either side, so the entire vehicle did not have to be turned. The Type 1 Ho-Ni I carried 54 rounds of ammunition.
They were designed to operate as self-propelled artillery at ranges of up to 12,000 metres (7.5 mi). The design had no provision for a defensive machine gun, which together with the open structure made it vulnerable in close combat.
The Type 97 chassis, suspension and diesel engine were used unchanged.[3] The 75 mm Type 90 Field Gun, was protected on three sides by 51 mm thick armored plate. The hull armored plate was 25 mm on the sides and 20 mm on the rear.
The file contains the unit and pcx files. Model is not my own creation. Wyrmshadow helped with the animation files. I merely put the pieces together and cleaned up the model for CivIII and added some what if pieces. A big thanks to everyone that helped out!
The Type 1 Ho-Ni I was the first self-propelled gun design of this particular type. They were meant to be self-propelled artillery and tank destroyers for armored divisions. The plan was for the Type 1 Ho-Ni I gun tank to form part of a fire support company in each of the tank regiments. The first conversion took place in June, 1941. Production of the Type 1 Ho-Ni I took place during 1942. The total number of Type 1 Ho-Ni I units produced was only 26.
The Type 1 Ho-Ni I was developed by using the existing Type 97 chassis and engine, and replacing the gun turret with a Type 90 75 mm field gun mounted in an open casemate with frontal and side armour only. The gun could elevate from -5 to +25 degrees; the gun mounting could also traverse up to 20 degrees either side, so the entire vehicle did not have to be turned. The Type 1 Ho-Ni I carried 54 rounds of ammunition.
They were designed to operate as self-propelled artillery at ranges of up to 12,000 metres (7.5 mi). The design had no provision for a defensive machine gun, which together with the open structure made it vulnerable in close combat.
The Type 97 chassis, suspension and diesel engine were used unchanged.[3] The 75 mm Type 90 Field Gun, was protected on three sides by 51 mm thick armored plate. The hull armored plate was 25 mm on the sides and 20 mm on the rear.
The file contains the unit and pcx files. Model is not my own creation. Wyrmshadow helped with the animation files. I merely put the pieces together and cleaned up the model for CivIII and added some what if pieces. A big thanks to everyone that helped out!
