Civilization V Trainer v 1.0.1.511 (R6) by DelphiUniverse
----------------------
1.0.1.511 (R6) Changes
----------------------
* Culture cheat didn't work when using Civ DX11 executable (fixed)
* Golden Progress didn't work when using Civ DX11 executable (fixed)
* Golden turn didn't work when using Civ DX11 executable (fixed)
* Great General didn't work when using Civ DX 11 executable (fixed)
-------------
About Trainer
-------------
This trainer is designed to work with Civilization 5 v 1.0.1.511
DirectX 9 and DirectX 11.
Do not attempt to use it with earlier or future versions of the game.
It will contaminate and corrupt memory if you do.
This trainer will give you the following:
* Gold
* Golden Age Progress
* Golden Age Turns
* Culture
* Strategic Resources
* Luxury Resources
* Clear spent resource slots
* Great General
* Unit Experience
* Movement
* Heal units
* City Modifier
* Cargo overload
* Full hotkey support
* Customizable (See Settings.ini)
------------
Installation
------------
1. Create a new folder anywhere you like.
2. Extract archive into that folder.
3. Done.
----------
How to use
----------
Start Trainer or Game in any order you like
--------------
Run Priorities
--------------
Here is a detailed description of how the trainer manages priorities, both on the trainer and civilization:
When trainer is Un-Focused: Trainer gets a very low priority and Civilization gets the highest priority setting.
When trainer is Focused: Trainer get normal priority and Civilization gets idle priority.
---------------
Switched Cheats
---------------
BEWARE: Always turn off switched cheats before making another turn. ALT + BACKSPACE will quickly turn off all switched cheats.
1: MOVEMENT SWITCH:
This cheat gives unlimited movement points to units. Set initial movement points in the editbox, this is not necessary as it already is set to a good initial value.
2: EXPERIENCE SWITCH:
This cheat gives experience to units. Set the experience value you want in the editbox then click your units you want to apply this value upon, one after another. You only need to click them once, you can also scroll quickly through all units with the arrow buttons.
3: HEALING SWITCH:
This cheat will set health points on your units. Set the health point you want in the editbox on the left side (it can be in the range of 0-10 where 0 is no health and 10 is full health) Then click all units you want to set this health value upon.
4: CITY MODIFIER SWITCH:
This is probably the most complex cheat to use. (It's really not that complex). This cheat will set the city modifier value (it is in percentage %).
It will set the modifier value on 3 things: Production, Science and Gold. Once you are set, you will produce alot of research and gold per turn, and making you able to research science in only one turn and also produce buildings, wonders and units in only one turn. To have this cheat work you will need to buy OR sell a building that affects any of these 3 areas. Thats it.
Quick hints: I recommend buying:
University (to enable modifier for science)
Factory (to enable production modifier)
Stock Exchange (to enable gold modifier)
You can also sell buildings that affects these areas, the modifier will update that way too.
5: CARGO SWITCH:
This cheat will make it possible to overload units like the carrier, missile cruiser or nuclear submarines with missiles and aircrafts. I thought they carried way to few units with them, so this is a nice cheat to use. Activate this cheat every time you need to load units that exceed the maximum allowed limit. If you want to further overload a unit that is already overloaded you also need to activate this cheat every time you need to overload it further.
-------
Hotkeys
-------
ALT + F1 = Movement Cheat
ALT + F2 = Experience
ALT + F3 = Healing
ALT + F5 = Modifier (Science,Production and Gold)
ALT + F6 = Cargo
ALT + F12 = Shut down trainer remotely (Dropping melody will be played)
ALT + BACKSPACE = Turn off all cheat switches
ALT + INSERT = Resources (Set value to value found in Settings.ini)
ALT + HOME = Gold (Set value to value found in Settings.ini)
ALT + PAGEUP = Culture (Set value to value found in Settings.ini)
ALT + DELETE = Golden Prog (Set value to value found in Settings.ini)
ALT + END = Golden Turns (Set value to value found in Settings.ini)
ALT + PGDOWN = Great General (Set value to value found in Settings.ini)
SHIFT + ALT + INSERT = Zero out Resources
SHIFT + ALT + HOME = Zero out Gold
SHIFT + ALT + PAGEUP = Zero out Culture
SHIFT + ALT + DELETE = Zero out Golden Progress
SHIFT + ALT + END = Zero out Golden Turns
SHIFT + ALT + PGDOWN = Zero out Great General Progress
ALT + UP = Quickly set all 6 primary cheats to value found in Settings.ini
ALT + LEFT = Free spent resource slots
ALT + RIGHT = Zero all (Will zero out the following):
1: Gold
2: Golden Age Progress
3: Golden Age Turns
4: Culture
5: All Strategic and Luxury Resources
6: Great General Progress
---------------
UpDown Controls
---------------
I have added Up-Down controls to all edit boxes in the program.
You may change values in an edit box in many ways:
1: Click a button to choose a predefined value.
2: Click the edit box and type a custom value.
3: Click the up-down control buttons to change values.
4: Use the up-down arrow keys on your keyboard.
5: Use mouse wheel to change values.
---------------
Troubleshooting
---------------
Q1: Trainer doesnt work?
A1: Use only with Civ 5 version 1.0.1.511. It will not work with other versions.
Q2: Trainer still doesnt work?
A2: Your firewall/antivirus blocked it or sandboxed it. Unblock it, shut down trainer and restart it again
Q3: Trainer is still not working?
A3: The 6 primary cheats will only update after you click a city or any operations that updates the display
Q4: Cheats are partially working and crashes the game on a regular basis, why?
A4: Be absolutely sure that you have the correct version of the game, especially the file 'CvGameCoreDLLFinal Release.dll'.
If that file is different or updated, the trainer just might not work. If you have problems with crashes, send me an
e-mail with the MD5 hash of that file. I use SkidRow myself (just a tip).
Q5: I use WinXP and the trainer runs and quits almost instantly?
A5: Try to run it using Win98 Compatability mode.
Q6: The trainer is running with very high cpu activity, why?
A6: The keyboard polling routine is responsible for this, it will be lowered to 0, 1 or 2 percent cpu usage as soon as the trainer window loses focus. This is nothing to worry about. Read "Run Priorities" further up in this readme for more information about this.
--------
Feedback
--------
Please report new suggestions and bug reports here on CivFanatics or on ThePirateBay.org where you can find me under
the name of DelphiUniverse. Send an e-mail to the address found in the .rar archive comment section.
------
Author
------
Coder : DelphiUniverse
Language : Microsoft Macro Assembly
----------------------
1.0.1.511 (R6) Changes
----------------------
* Culture cheat didn't work when using Civ DX11 executable (fixed)
* Golden Progress didn't work when using Civ DX11 executable (fixed)
* Golden turn didn't work when using Civ DX11 executable (fixed)
* Great General didn't work when using Civ DX 11 executable (fixed)
-------------
About Trainer
-------------
This trainer is designed to work with Civilization 5 v 1.0.1.511
DirectX 9 and DirectX 11.
Do not attempt to use it with earlier or future versions of the game.
It will contaminate and corrupt memory if you do.
This trainer will give you the following:
* Gold
* Golden Age Progress
* Golden Age Turns
* Culture
* Strategic Resources
* Luxury Resources
* Clear spent resource slots
* Great General
* Unit Experience
* Movement
* Heal units
* City Modifier
* Cargo overload
* Full hotkey support
* Customizable (See Settings.ini)
------------
Installation
------------
1. Create a new folder anywhere you like.
2. Extract archive into that folder.
3. Done.
----------
How to use
----------
Start Trainer or Game in any order you like
--------------
Run Priorities
--------------
Here is a detailed description of how the trainer manages priorities, both on the trainer and civilization:
When trainer is Un-Focused: Trainer gets a very low priority and Civilization gets the highest priority setting.
When trainer is Focused: Trainer get normal priority and Civilization gets idle priority.
---------------
Switched Cheats
---------------
BEWARE: Always turn off switched cheats before making another turn. ALT + BACKSPACE will quickly turn off all switched cheats.
1: MOVEMENT SWITCH:
This cheat gives unlimited movement points to units. Set initial movement points in the editbox, this is not necessary as it already is set to a good initial value.
2: EXPERIENCE SWITCH:
This cheat gives experience to units. Set the experience value you want in the editbox then click your units you want to apply this value upon, one after another. You only need to click them once, you can also scroll quickly through all units with the arrow buttons.
3: HEALING SWITCH:
This cheat will set health points on your units. Set the health point you want in the editbox on the left side (it can be in the range of 0-10 where 0 is no health and 10 is full health) Then click all units you want to set this health value upon.
4: CITY MODIFIER SWITCH:
This is probably the most complex cheat to use. (It's really not that complex). This cheat will set the city modifier value (it is in percentage %).
It will set the modifier value on 3 things: Production, Science and Gold. Once you are set, you will produce alot of research and gold per turn, and making you able to research science in only one turn and also produce buildings, wonders and units in only one turn. To have this cheat work you will need to buy OR sell a building that affects any of these 3 areas. Thats it.
Quick hints: I recommend buying:
University (to enable modifier for science)
Factory (to enable production modifier)
Stock Exchange (to enable gold modifier)
You can also sell buildings that affects these areas, the modifier will update that way too.
5: CARGO SWITCH:
This cheat will make it possible to overload units like the carrier, missile cruiser or nuclear submarines with missiles and aircrafts. I thought they carried way to few units with them, so this is a nice cheat to use. Activate this cheat every time you need to load units that exceed the maximum allowed limit. If you want to further overload a unit that is already overloaded you also need to activate this cheat every time you need to overload it further.
-------
Hotkeys
-------
ALT + F1 = Movement Cheat
ALT + F2 = Experience
ALT + F3 = Healing
ALT + F5 = Modifier (Science,Production and Gold)
ALT + F6 = Cargo
ALT + F12 = Shut down trainer remotely (Dropping melody will be played)
ALT + BACKSPACE = Turn off all cheat switches
ALT + INSERT = Resources (Set value to value found in Settings.ini)
ALT + HOME = Gold (Set value to value found in Settings.ini)
ALT + PAGEUP = Culture (Set value to value found in Settings.ini)
ALT + DELETE = Golden Prog (Set value to value found in Settings.ini)
ALT + END = Golden Turns (Set value to value found in Settings.ini)
ALT + PGDOWN = Great General (Set value to value found in Settings.ini)
SHIFT + ALT + INSERT = Zero out Resources
SHIFT + ALT + HOME = Zero out Gold
SHIFT + ALT + PAGEUP = Zero out Culture
SHIFT + ALT + DELETE = Zero out Golden Progress
SHIFT + ALT + END = Zero out Golden Turns
SHIFT + ALT + PGDOWN = Zero out Great General Progress
ALT + UP = Quickly set all 6 primary cheats to value found in Settings.ini
ALT + LEFT = Free spent resource slots
ALT + RIGHT = Zero all (Will zero out the following):
1: Gold
2: Golden Age Progress
3: Golden Age Turns
4: Culture
5: All Strategic and Luxury Resources
6: Great General Progress
---------------
UpDown Controls
---------------
I have added Up-Down controls to all edit boxes in the program.
You may change values in an edit box in many ways:
1: Click a button to choose a predefined value.
2: Click the edit box and type a custom value.
3: Click the up-down control buttons to change values.
4: Use the up-down arrow keys on your keyboard.
5: Use mouse wheel to change values.
---------------
Troubleshooting
---------------
Q1: Trainer doesnt work?
A1: Use only with Civ 5 version 1.0.1.511. It will not work with other versions.
Q2: Trainer still doesnt work?
A2: Your firewall/antivirus blocked it or sandboxed it. Unblock it, shut down trainer and restart it again
Q3: Trainer is still not working?
A3: The 6 primary cheats will only update after you click a city or any operations that updates the display
Q4: Cheats are partially working and crashes the game on a regular basis, why?
A4: Be absolutely sure that you have the correct version of the game, especially the file 'CvGameCoreDLLFinal Release.dll'.
If that file is different or updated, the trainer just might not work. If you have problems with crashes, send me an
e-mail with the MD5 hash of that file. I use SkidRow myself (just a tip).
Q5: I use WinXP and the trainer runs and quits almost instantly?
A5: Try to run it using Win98 Compatability mode.
Q6: The trainer is running with very high cpu activity, why?
A6: The keyboard polling routine is responsible for this, it will be lowered to 0, 1 or 2 percent cpu usage as soon as the trainer window loses focus. This is nothing to worry about. Read "Run Priorities" further up in this readme for more information about this.
--------
Feedback
--------
Please report new suggestions and bug reports here on CivFanatics or on ThePirateBay.org where you can find me under
the name of DelphiUniverse. Send an e-mail to the address found in the .rar archive comment section.
------
Author
------
Coder : DelphiUniverse
Language : Microsoft Macro Assembly
