Mesoamerican Leaderhead Pack

Sword_Of_Geddon · Sep 3, 2005

Hello. Having recently gotten Poser(yesterday as of this message), I decided to help out everyone with Mesoamerican scenerios with some leaderheads. Other creators may ask for me to post their work here.

-R8XFT, if you are reading this, I will post, or you can post, your works here when you are done

Only two heads by me for now, and one by my friend ShiroKobbure, but I can promise you that more is to come...

The Files: (preview on the bottom of this post)

Part One: http://www.civfanatics.net/uploads10/Zapotec.zip
Part Two: http://www.civfanatics.net/uploads10/Zapotec_02.zip

And interducing the Olmec general

preview on the bottom of this post)

http://www.civfanatics.net/downloads/civ3/graphics/General.zip

Meet the Mixtec Priest(Previews on the bottom of the post)

Part One: http://www.civfanatics.net/uploads10/Mixtec.zip
Part Two: http://www.civfanatics.net/uploads10/Mixtec2.zip

And something great by my buddy Shiro, yet another Olmec leader(Great background btw):

http://www.civfanatics.net/uploads10/Olmec1.zip
http://www.civfanatics.net/uploads10/Olmec2.zip

ShiroKobbure · Sep 3, 2005

did you test that in game first?
is the size 200x240? In the Render options I would increase the quality settings. Move his eyes so that he looks at the player. At the moment it looks like he is watching passing car.
other than that it is a good first head

Sword_Of_Geddon · Sep 3, 2005

Hes pissed in the pic and doesn't want to look at you..

I've tested it in game and I'm pleased with how it turned out, other than the lack of props...

ShiroKobbure · Sep 3, 2005

it works fine?
even though the size isnt correct?

Rob (R8XFT) · Sep 4, 2005

Sword_Of_Geddon said:
R8XFT, if you are reading this, I will post, or you can post, your works here when you are done

Thanks for the kind offer, but I'll start my own thread, thanks

.

I've sent you some tips in a pm; essentially, it's a good start, but take Shiro's advice on size and render quality (I spoke of this in my pm). You'll be amazed how much better it'll look when you've changed these basics. In terms of the actual leader himself, his look is absolutely fine, a good background too. I'm assuming the body size is set at 100%; I'd set it at 120%, getting him nearer to the camera.

I do think that once you've done a couple of leaderheads and start improving the quality with practice, that you'll make a good leaderhead maker - you're keen enough to keep practicing; my other advice is that people will make good comments about your work, but others won't. Some of the criticism will be constructive, some will be blatant damning of your work, so just laugh it off and feel confident about your artwork. However, the thing to do is practice, practice, practice. Get a method (I've sent you mine) and that really helps.

Corn Shucker · Sep 4, 2005

Only one head for now, but I can promise you that it wont be the first!

You mean last? lol... anyway, great first LH! I'm assuming that there was a quality loss in the pic displayed in the first post?

Sword_Of_Geddon · Sep 5, 2005

Yes, there is always a quality loss with previews...

Sword_Of_Geddon · Sep 6, 2005

Second head of this pack is now availbible on the first post!

Sword_Of_Geddon · Sep 7, 2005

No comments....

ShiroKobbure · Sep 7, 2005

well I dont know what these people looked like. I would have to research alittle to comment. But I think you should slow down and pratice and try to put more into the heads. Also in the render options raise the quality.

Sword_Of_Geddon · Sep 7, 2005

That makes the files bigger though. But I will look into it.

Traianus · Sep 7, 2005

I'll be watching this thread closely. Good work so far.

Anarki · Sep 7, 2005

Excellent another Leaderhead Maker, but you should definately take ShiroKobbure's advice.

ShiroKobbure · Sep 7, 2005

it should only make the AVI large. Once it is made into a FLC it shouldnt be so large. And I would rather have a higher quality rendering so it can fit better in the game

Sword_Of_Geddon · Sep 7, 2005

I will remember that when I render next Shiro. Thankyou for the advice...

Traianus: Thankyou. You were one of the people I had in mind for this btw.

ShiroKobbure · Sep 9, 2005

I sent you a gift to your PM box

Sword_Of_Geddon · Sep 9, 2005

Thankyou Shiro, I've updated the first post to include credit to you for your work, as well as the two links for the download my friend.

PS: Now that i've gotten into LH making myself, I can see why you don't like doing PCXs...lol. Eventally I'll get to them, and I will probably make some for some of your LHs as well.

ShiroKobbure · Sep 9, 2005

you might want to post previews of all the heads in the first post. I sent you the address to my preview pic in the PM

DJ Bonebraker · Sep 9, 2005

Sword, there's a good LH tutorial in the tutorial forum. Also, I found that it takes less time to render if you render a series of bitmaps into a dedicated folder at the proper 200x240 resoulution. Then all you have to do is take one of the BMP files, reduce it to 254 colors and save the pallette, then use the animation wizard to convert the 121 bitmaps into a FLC, then use the palette you created to get the proper transparency (since the last two colors won't be used by any of the frames, you won't have any transparency issues).

Good LH, BTW

Sword_Of_Geddon · Sep 9, 2005

I usually dont have long rendering times, if I do its because my comp frooze...

I dont know why this is the cause. Thankyou for the advice though. I think you are a class member on this board HM. Wish I could meet you. (I saw Bamboo for the first time in DC, thought it was trees at first..)

Mesoamerican Leaderhead Pack

Arbiter of the Sword

Attachments

Still modding Civ3

Arbiter of the Sword

Still modding Civ3

Ancient Briton

Great Khorn

Arbiter of the Sword

Arbiter of the Sword

Arbiter of the Sword

Still modding Civ3

Arbiter of the Sword

Why is it dark in here?

Prince

Still modding Civ3

Arbiter of the Sword

Still modding Civ3

Arbiter of the Sword

Still modding Civ3

a.k.a Laura

Arbiter of the Sword

Similar threads