GenMarshall
High Elven ISB Capt & Ghost Agent
Can any one please make a Leopard 2 Tank for the Germans
. I am Planing on a Mini-Mod for the Germans that would include nonnob3's German Infantry units as flavor units for the Germans. I am also going to use Kinboat's A7V Tank and would appere when you get Combustion. I am Requesting a Modern Tank for the Germans called the Leopard 2 Tank. Here is the discription of the unit. Fell free to use the discription in your civilopedia when someone creates the Leopard Tank
.


Originaly at www.fprado.com/armorsite/leo2.htm
The development of the Leopard 2 MBT can be traced back to a project started in the 1960's. At this time Germany and the United States were still working on the MBT-70 program, so this project had a very low priority.
While Germany and the United States were developing the MBT/KPz-70, their agreement did not allow a parallel national tank program, but when the Leopard 1 MBT was introduced into service in 1965 Porsche was awarded a contract to develop improved components to increase its combat effectiveness to the standard demanded by the MBT/KPz-70. This program lasted until 1967, when the contract expired, and became known as 'Vergoldeter Leopard' or 'Gilded Leopard'.
When the first cracks appeared in 1967 in the German/American cooperation program for joint development of the MBT/KPz-70, the German Ministry of Defense decided to continue and to increase the development of the 'Vergoldeter Leopard', which later became known as 'Keiler' (Wild Boar).
The prototypes looked at first glance very much like the Leopard 1 A4, but with a wedge-shaped bow and an exhaust grille moved to the rear plate. The roadwheels came from the MBT/KPz-70, and the return rollers from the Leopard 1. The engine also came from the MBT/KPz-70, a 12 cylinder MTU MB-873 Ka-500 water-cooled multi-fuel four-stroke engine, together with its 20 kW generator, gearbox, air filters, and the cooling and braking systems, forming a compact group that could be easily replaced in 15 minutes. Ten of the seventeen turrets built were fitted with a 105 mm smooth bore gun while the remaining seven had a 120 mm smooth bore gun, both designed and produced by Rheinmetall.
When the first analysis of the Yom Kippur War of 1973 became available, it became clear that increased armor protection would be a decisive factor in the future. The outcome was a decision of upgrade the Leopard 2 to MLC 60 (Military Loading Class 60 tons), which would allow increased armor, and to modify one of the turrets with a new multi-layer type of armor. This resulted in a breakthrough in the Leopard 2 program and the first step towards the Leopard 2 AV.
During 1973, negotiations began between the United States and Germany to standardize certain components of both nations main battle tanks of the eighties. As a result of this, by 1976 it was agreed to study how Leopard 2 could be modified to meet US performance and constraints. Based on the altered German and US military demands, Porsche, Krauss-Maffei, and Wegmann designed and built the Leopard 2 AV (Austere Version).
The 120 mm Rheinmetall main gun is fully stabilized in both azimuth and elevation, and the WNA-H22 electro-hidraulic gun control system is fitted. The gun fires two types of ammunition, both developed by Rheinmetall APFSDS-T, known as DM-33 KE (Kinetische Energy), and HEAT-MP-T, known as DM-12 MZ (Mehrzweck = multipurpose), both types having combustible cases. 27 rounds of 120 mm ammunition are stored in a special magazine in the forward section of the hull, to the left of the driver's station - additional 15 (making a total of 42) are stored in the left side of the turret bustle, and separated from the fighting compartment by an electrically operated door. Should the ammunition in the bustle be hit, blow-off panels in the turret roof would direct any explosion upwards. A co-axial 7.620mm MG 3is mounted to the left of the main gun and 4,750 rounds of machine gun ammunition are carried.