The Mitsubishi A6M "Zero" is a long-range carrier-based fighter aircraft formerly manufactured by Mitsubishi Aircraft Company, a part of Mitsubishi Heavy Industries, and was operated by the Imperial Japanese Navy from 1940 to 1945. The A6M was designated as the Mitsubishi Navy Type 0 carrier fighter or the Mitsubishi A6M Rei-sen. The A6M was usually referred to by its pilots as the Reisen "0" being the last digit of the imperial year 2600 (1940) when it entered service with the Imperial Navy. The official Allied reporting name was "Zeke", although the name "Zero" (from Type 0) was used colloquially as well.
A6M5c, Model 52 (Hei, 52c) – Armament change: One 13.2 mm (.51 in) Type 3 machine gun was added in each wing outboard of the cannon, and the 7.7 mm gun on the left side of the cowl was deleted. Four racks for rockets or small bombs were installed outboard of the 13 mm gun in each wing. Engine change: Some sources state that the hei had a Sakae 31 engine In addition, a 55 mm (2.2 in) thick piece of armored glass was installed at the headrest and an 8 mm (0.31 in) thick plate of armor was installed behind the seat. The mounting of the central 300 l (79 US gal) drop tank changed to a four-post design.[69] Wing skin was thickened further. The first of this variant was completed in September 1944. Because of the gain in weight, this variant was used mainly for intercepting B-29s and special attack.
The file contains the unit and pcx files. Model is not my own creation. Wyrmshadow helped with the animation files. I merely put the pieces together and cleaned up the model for CivIII and added some what if pieces. A big thanks to everyone that helped out!
A6M5c, Model 52 (Hei, 52c) – Armament change: One 13.2 mm (.51 in) Type 3 machine gun was added in each wing outboard of the cannon, and the 7.7 mm gun on the left side of the cowl was deleted. Four racks for rockets or small bombs were installed outboard of the 13 mm gun in each wing. Engine change: Some sources state that the hei had a Sakae 31 engine In addition, a 55 mm (2.2 in) thick piece of armored glass was installed at the headrest and an 8 mm (0.31 in) thick plate of armor was installed behind the seat. The mounting of the central 300 l (79 US gal) drop tank changed to a four-post design.[69] Wing skin was thickened further. The first of this variant was completed in September 1944. Because of the gain in weight, this variant was used mainly for intercepting B-29s and special attack.
The file contains the unit and pcx files. Model is not my own creation. Wyrmshadow helped with the animation files. I merely put the pieces together and cleaned up the model for CivIII and added some what if pieces. A big thanks to everyone that helped out!
