Dragon_Ninja_X
Chieftain
- Joined
- Jul 14, 2004
- Messages
- 2
NEX I Know That Im playing A Normal Single Player Game Without Changeing Any names And Just keeps Saying the Same Thing
PowerBar Training Utility
- Thread starter Nexushyper
- Start date
Nexushyper
Warlord
send me a save file and I'll look at it. My yahoo is Nexushyper my MSN is nexushyper@yahoo.com
NateDawgNY
Just Chillin'
It's actually an editor flag you have to uncheck. The error isn't with PowerBar.
jeannie
Warlord
twistedx said:Did anyone ever recommend a fix to this? I am experiencing the same issue as well. My timers are enabled, and it happens no matter how many units are on the map. I've tried everything recommended in previous posts to no avail. Any ideas?
There is no possible FIX for 'unable to apply selected filter'. It's a WARNING / INFORMATION message. The UNIT screen has 'OWNER' checked off as a filter criteria as a default. If you go to the UNIT screen when the selected TRIBE does not have any units (for example, it's a civ you have conquered), you will get that warning because it can't find any units for that civ. You'll also get the message if you've selected other filter criteria and there are no units for the criteria you select.
jeannie said:
Thanks for the reply. The problem is that it happens to all civs (my own included). It makes sense that the issue should only occur on conquered civs or civs without units, but that isn't the case.
Here's a quick breakdown of what I'm doing and seeing...
1. Game is running and Powerbar is open. My civ is Americans (note: it doesn't matter what civ I use, but for this example I am the Americans). 'Americans' is selected as the tribe in Powerbar. I have roughly 30 military units and a few settlers built.
2. Click on 'UNIT'. I receive the message "Unable to apply selected filter" twice. I click on 'OK' to both messages.
3. The unit menu appears. The dropdown box that should contain a list of units for the Americans is blank. Note that 'Owner' is checked, but 'Unit' and 'Type' are not checked.
4. If I de-select the 'Owner' check box, the unit downdown box is populated. However, it is populated with 235 (number varies between games) '00000 Barbarian Settler' units. No other units are listed. Also note that the X/Y coordinates for all listed units are 0/0.
5. FYI, selecting the 'Unit' or 'Type' checkbox(es) causes the "Unable to apply selected filters" dialogue box to return.
I hope that this clarifies this issue a bit. Am I doing something wrong?
Thanks!
jeannie
Warlord
TwistedX - that definitely sounds like a bug. Can you send Nexushyper a saved game where this is happening, and tell him which Civ game you're playing (vanilla, PTW, Conquests) so he can try to debug the problem?
Nexushyper
Warlord
Ok, 4.1.5 (and for those with Epilepsy 4.1.5E) is now out!!
This fixes the bug with "Multiplayer mode detected" when in single player.
You can download this from the first post!
NOTE: Custom mods may not work with PB, Snoopy's and Rhye's seem to work just fine! Also, Gold Edition and Double Pack may not work. I don't have these so I can't test!
This fixes the bug with "Multiplayer mode detected" when in single player.
You can download this from the first post!
NOTE: Custom mods may not work with PB, Snoopy's and Rhye's seem to work just fine! Also, Gold Edition and Double Pack may not work. I don't have these so I can't test!
Nexushyper
Warlord
Are you using Civ # original, PTW, C3C??
Did you buy the Gold Edition? And tell me exactly what buttons you push, which civs you pick, what options you choose etc. And then I can test for that exact condition and see what is going on.
And also send me a saved game file so I can test that as well.
Did you buy the Gold Edition? And tell me exactly what buttons you push, which civs you pick, what options you choose etc. And then I can test for that exact condition and see what is going on.
And also send me a saved game file so I can test that as well.
Nexushyper
Warlord
Sorry I don't have more time to add new features and such, but eventually a window will open up and I will have time to fully fix some bugs and add features. FOr the mean time the current version seems to work on most machines with little trouble. I will continue, time permitting as I'm in teh Air Force and kept very busy, to look into the "re-loading" bug and multiplayer detected bug. I'm a bit puzzled why they both seem to persist and hang around, but I will figure it out or blame it on teh fact that PowerBar is messing with memory and that can be dangerous... anyways, thanks for teh support. Many of you have contacted me on MSN or Yahoo to report bugs/suggestions or request online gaming support from other forums. I am dedicated to help where I can. And please, feel free to just chat!
Again, thanks for the support and enjoy the program!
Again, thanks for the support and enjoy the program!
I'm using Powerbar with the Age of Discovery Conquest, and I noticed that when I choose to reveal the map, the entire map is not revealed. Most of South America and Africa on the map remains hidden. Furthermore, Powerbar will crash if you do something within the hidden area (clear jungles, add roads, etc), saying that the "specified index is out of range".
One small request: perhaps in a future version you could have "instant worker job completion"...?
One small request: perhaps in a future version you could have "instant worker job completion"...?
Nexushyper
Warlord
Ok, I can't believe I have to say this again
POWERBAR WILL NOT WORK WITH ANY, I MEAN ANY, OF THE CONQUESTS. IT ONLY WORKS WITH THE NORMAL, SINGLE PLAYER C3C BUT NOT THE CONQUESTS THAT COME WITH IT.
Sorry but it is really annoying when I have it listened in the help file and the first post of this thread that it doesn't work with the conquests. That is why it crashes, IT DOESN'T work with them!!!
Please people, before posting here atleast read the first post where you download PowerBar from and the help file!!!
POWERBAR WILL NOT WORK WITH ANY, I MEAN ANY, OF THE CONQUESTS. IT ONLY WORKS WITH THE NORMAL, SINGLE PLAYER C3C BUT NOT THE CONQUESTS THAT COME WITH IT.
Sorry but it is really annoying when I have it listened in the help file and the first post of this thread that it doesn't work with the conquests. That is why it crashes, IT DOESN'T work with them!!!
Please people, before posting here atleast read the first post where you download PowerBar from and the help file!!!
zenos paradox
Chieftain
- Joined
- Aug 18, 2004
- Messages
- 5
Hi everybody, I'm new to this forum (and to Civ too 
) and I was curious if nexus is still working on the Filter bug. I'm talking about the one where (in Vanilla Civ 3 1.29) I load up the game, pick all the settings, I'm in the game, and I load Power Bar and the City Window works great, but when I click on the "units" button I receive the "Unable to apply selected filter" dialog. If i mess around with all the filters and reload I still get this error with every single one of the filters, doesn't matter if i put all of them on, or just Owner, or just units. Like it's been said before, with all of them off, I get a bunch of 0000 Barbarian Settlers in 0,0 axis. Is this a new feature that maybe hasn't had the full bug testing cycle yet? I have a few programming skills and could help if you wanted Nexus. 
) and I was curious if nexus is still working on the Filter bug. I'm talking about the one where (in Vanilla Civ 3 1.29) I load up the game, pick all the settings, I'm in the game, and I load Power Bar and the City Window works great, but when I click on the "units" button I receive the "Unable to apply selected filter" dialog. If i mess around with all the filters and reload I still get this error with every single one of the filters, doesn't matter if i put all of them on, or just Owner, or just units. Like it's been said before, with all of them off, I get a bunch of 0000 Barbarian Settlers in 0,0 axis. Is this a new feature that maybe hasn't had the full bug testing cycle yet? I have a few programming skills and could help if you wanted Nexus. I've seen several posts about this error. But I don't think I've seen a resolution. Has there been one that I missed or is it still being worked on?
I've got a Windows XP Pro machine running Civ PTW 1.27f and I get the error when I click on the "H" key for highways.
I've got a Windows XP Pro machine running Civ PTW 1.27f and I get the error when I click on the "H" key for highways.
zenos paradox
Chieftain
- Joined
- Aug 18, 2004
- Messages
- 5
Lurker, are you refering to the error I got? The only problem I've had with PB is with the unit menu (which actually is a big problem, since I cant use any part of it 
). All the buttons in the city menu work fine, and getting a filter error from the "H" button wouldnt make any sense. Are you sure that's what it says?
And to Clarify , I read some more of the pages prior to this page, and I have auto reset on and everything else. I'm NOT the barbarian tribe nor do I have a small number of cities and units (15 cities and 40 or so workers atm). I do have 587 Barbarian settlers on my filter list, but thats not exactly what i want to modify . This appears to be a bug and I hope we can fix it (I do mean "we" 
)
). All the buttons in the city menu work fine, and getting a filter error from the "H" button wouldnt make any sense. Are you sure that's what it says?And to Clarify , I read some more of the pages prior to this page, and I have auto reset on and everything else. I'm NOT the barbarian tribe nor do I have a small number of cities and units (15 cities and 40 or so workers atm). I do have 587 Barbarian settlers on my filter list, but thats not exactly what i want to modify
. This appears to be a bug and I hope we can fix it (I do mean "we" )Zenos, I get the same Run-time error '9': Subscript out of range
every time I hit the "H" button for building Highways throughout my domain. I have around 20 cities and the only probable causes that I've read about in these forums might be the fact that the cities regions are overlapping, or the region of a couple of my cities are actually going off the visible map. It sounds like it might be the latter, but I'm not a programmer so I wouldn't be able to figure it out.
every time I hit the "H" button for building Highways throughout my domain. I have around 20 cities and the only probable causes that I've read about in these forums might be the fact that the cities regions are overlapping, or the region of a couple of my cities are actually going off the visible map. It sounds like it might be the latter, but I'm not a programmer so I wouldn't be able to figure it out.
