C2C - UEM - Ultimate-Earth-Map 100% MOD and SVN update compatible by Pit2015

I have the latest SVN release, installed and ran by the instructions, check for version 12, and am still getting the same unable to read error.
 
Touchandgoes said:
I did that... it's the weirdest thing. I'm not playing off of Steam if that helps...
Click to expand...

Did you tryed normal C2C maps do they work? At wich point it tells you unable to read?

Recheck first posting here:

Installation and usage:

Get and download the Caveman2Cosmos mod, then:

1. Unzip or copy the file C2C-UEM-ByPit2015-V4.3 to
...\Documents\My Games\beyond the sword\Saves\WorldBuilder

2. RECOMMEND: If you use steam, use Civilization IV: Beyond the Sword Beta "Original release" in Betas in steam.

3. Start Beyond the Sword select "Advanced" then "Load a Mod"

Load the Caveman2Cosmos mod.

Select Single Player then select "Play a Scenario", choose the scenario C2C-UEM-ByPit2015-V4.3 and start it.

Play this scenario in eternity speed, otherwise you will get technologys to fast in later game when you manage to grow big.

Highest difficulty level recommended for this scenario/map.

Make sure to play on Deity and Eternity game speed, otherwise you get techs to fast.

Please clear the cache folder before you start a new game. This removes the old cached data from your previously played C2C version and will help eliminate conflicts and oddities.

This is the Path to the proper cache folder to clear (delete contents) for Win 10 users:
C:\Users\"Username"\AppData\Local\My Games\Beyond the Sword\cache

Also turn off damaging terrain in BUG on new games.

Game on, have fun.
 
Touchandgoes said:
I did that... it's the weirdest thing. I'm not playing off of Steam if that helps...
Click to expand...
Sounds like your SVN installation is corrupt.
Delete it and check out again.

First try redownloading latest map.
 
Last edited:
I redownloaded C2C 40.1 and installed UEM 4.3 according to the instructions. Still getting the unable to read error when I select the map on the play scenario and press ok. Space maps work just fine.
I also tried UEM 4.2 and got the same error.
 
Touchandgoes said:
I redownloaded C2C 40.1 and installed UEM 4.3 according to the instructions. Still getting the unable to read error when I select the map on the play scenario and press ok. Space maps work just fine.
I also tried UEM 4.2 and got the same error.
Click to expand...
4.3 doesn't work on V40.1, same with 4.2 I guess.
V4.3 loaded normally on latest SVN for me.
I guess you shouldn't be in scenario selection when copying map to publicmaps in mod folder.
 
raxo2222 said:
4.3 doesn't work on V40.1, same with 4.2 I guess.
V4.3 loaded normally on latest SVN for me.
I guess you shouldn't be in scenario selection when copying map to publicmaps in mod folder.
Click to expand...
Oh I see. So the only way this works is through the SVN route? (which admittedly I don't quite understand)
Thanks for your help.
 
Mind Flower said:
soft hammer percussion not revealing it
Click to expand...

Maybe mod bug, maybe it will work when you get the tech "Mining", it will enable gold. You can go into worldbuilder and look for gold in australia to make sure you did not installed something wrong.
 
Pit2015 said:
Maybe mod bug, maybe it will work when you get the tech "Mining", it will enable gold. You can go into worldbuilder and look for gold in australia to make sure you did not installed something wrong.
Click to expand...
Its not mod bug, he has V40.1, so I guess your older maps doesn't have gold in Australia.
 
raxo2222 said:
Its not mod bug, he has V40.1, so I guess your older maps doesn't have gold in Australia.
Click to expand...

Hmm... no UEM 4.2 and UEM 4.3 has BonusType=BONUS_GOLD_ORE.

UEM 4.1 has BonusType=BONUS_GOLD.

So its because of your bonus name changes, if hes using old C2C 40.1 he needs to use UEM 4.1 hes using wrong UEM map maybe.

@Mind Flower You need to use with C2C 40.1 UEM 4.1 better install SVN to use latest C2C version, then you can use UEM 4.2 and 4.3.

Also there is guide to getting SVN: https://github.com/caveman2cosmos/Caveman2Cosmos/wiki/Using-SVN

I write that to first posting now... into install manual:

"NOTE if you use C2C 40.1 you need UEM 4.1 if you use the latest C2C version via SVN or a higher version above C2C 40.1 then you can use UEM 4.3+ maps/scenarios:"

 
Last edited:
I accedentlly put the loader in the wrong drive. Does in need to be in the mod folder? I did everything and didnt see gold in australia. maybe I need to start over?
 
Mind Flower said:
I accedentlly put the loader in the wrong drive. Does in need to be in the mod folder? I did everything and didnt see gold in australia. maybe I need to start over?
Click to expand...

As said, if you use Caveman2Cosmos 40.1 then download UEM 4.1 map and start a new game.

If you use Caveman2Cosmos SVN then download UEM 4.3 map and start a new game.

If you want to use the latest Caveman2Cosmos version install SVN. Caveman2Cosmos SVN setup: SVN: https://github.com/caveman2cosmos/Caveman2Cosmos/wiki/Using-SVN

INSTALLATION AND USAGE:

NOTE if you use C2C 40.1 you need UEM 4.1 if you use the latest C2C version via SVN or a higher version above C2C 40.1 then you can use UEM 4.3+ maps/scenarios:

Get and download the Caveman2Cosmos mod, then:

1. Unzip or copy the file C2C-UEM-ByPit2015-V4.3 to
...\Documents\My Games\beyond the sword\Saves\WorldBuilder

2. RECOMMEND: If you use steam, use Civilization IV: Beyond the Sword Beta "Original release" in Betas in steam.

3. Start Beyond the Sword select "Advanced" then "Load a Mod"

Load the Caveman2Cosmos mod.

Select Single Player then select "Play a Scenario", choose the scenario C2C-UEM-ByPit2015-V4.3 and start it.

Play this scenario in eternity speed, otherwise you will get technologys to fast in later game when you manage to grow big.

Highest difficulty level recommended for this scenario/map.

Make sure to play on Deity and Eternity game speed, otherwise you get techs to fast.

Please clear the cache folder before you start a new game. This removes the old cached data from your previously played C2C version and will help eliminate conflicts and oddities.

This is the Path to the proper cache folder to clear (delete contents) for Win 10 users:
C:\Users\"Username"\AppData\Local\My Games\Beyond the Sword\cache

Also turn off damaging terrain in BUG on new games.

Game on, have fun.
 
You need to remove FEATURE_RAINWATER_BASIN as it doesn't exist anymore
Also change Version=12 to Version=13
 
You must log in or register to reply here.

Similar threads

The_J
  • Sticky
Old World update #135
Replies
7
Views
2K
PiR
PiR
The_J
Old World update #134
Replies
0
Views
648
The_J
The_J
I
Needs an earth map
Replies
5
Views
728
MutilationWave
MutilationWave
The_J
Old World update #133
Replies
9
Views
1K
Dale
Dale
The_J
Old World update #132
Replies
10
Views
1K
Dale
Dale
Back
Top Bottom