Resource icon

CRpSuite : Playing aids and game analysis utils 2.11.0

i'm playing a SP game for the first time for quite some time (AU503) and am using your tool mainly as trade assistant... great features, dianthus, both thumbs up!

maybe i'm too stupid: but is there a way to have a more noticeable notification? i currently have to ALT-tab every turn to check. those blinking panels don't appear when in the game. can i set it to initiate a system beep or some kind of (not annoying) ringtone? or if accoustic notification isn't possible: what about a automatic focus on the tool?
 
I think it does (just played the one time) but when I started the each application the first time I had to type it in.

:blush: I didn't read, just scanned where to find it.
 
Is there anyway to add the dates techs are learned to the Replay Viewer?

I've been trying to study some of the top players GOTM saves and it would be interesting to see their tech pace.

Thanks
 
Mistfit said:
Is this <installing the patch> Idiot proof? (read Mistfit proof) to install?
There's not much to it. The only gotcha is you might need to make sure the original 2.6.0 .msi file is still on your harddisk at the location you originally used to install it. The steps would be :
  1. Make sure CRpSuite is not currently installed using add/remove programs.
  2. Extract the CRpSuite260.msi file from the CRpSuite260.zip to your harddrive (Don't run the .msi directly).
  3. Install 2.6.0 using the extracted CRpSuite260.msi.
  4. Extract the CRpSuite261From260.msp file from the CRpSuite261From260.zip to your harddrive.
  5. Install the 2.6.0 patch using the extracted CRpSuite261From260.msp.
Let me know if you have any problems Mistfit.




sabrewolf said:
i'm playing a SP game for the first time for quite some time (AU503) and am using your tool mainly as trade assistant... great features, dianthus, both thumbs up!
Cheers sabrewolf!



sabrewolf said:
maybe i'm too stupid: but is there a way to have a more noticeable notification? i currently have to ALT-tab every turn to check. those blinking panels don't appear when in the game. can i set it to initiate a system beep or some kind of (not annoying) ringtone? or if accoustic notification isn't possible: what about a automatic focus on the tool?
CRpMapStat should pop to the front AND beep. Apart from the Pollution view which doesn't seem to notify at the moment (Just discovered this in the latter stages of COTM01). Which OS are you using? I've only tested on XP Pro and W2K.





Turner_727 said:
:blush: I didn't read, just scanned where to find it.
AlanH has been trying to teach me patience over in the GOTM forum, maybe I can try and teach you to read in this one :).





DJMGator13 said:
Is there anyway to add the dates techs are learned to the Replay Viewer?

I've been trying to study some of the top players GOTM saves and it would be interesting to see their tech pace.
As ainwood said, no. The only tech information available is for the current turn, not the previous turns. I've toyed with the idea of writing a program to log this information from the autosaves, and even started on it, but gave up on it as it's just too much work :(.
 
Dianthus,

I'll have to recheck, it may be a problem with my install. I can run 1.22 but not 1.15 now.
I won't be able to get back to you until late next month, but thank you for checking.

PF
 
I have another request...can you make it so the trading tab in MapStat indicates which civs you're currently at war with?
Ta.
 
Dianthus said:
AlanH has been trying to teach me patience over in the GOTM forum, maybe I can try and teach you to read in this one :).

Good luck.... ;)

Bartleby said:
I have another request...can you make it so the trading tab in MapStat indicates which civs you're currently at war with?
Ta.

Why not take it a step further and have MAs/MPPs/War/Peace....that would be useful.
 
Dianthus said:
CRpMapStat should pop to the front AND beep. Apart from the Pollution view which doesn't seem to notify at the moment (Just discovered this in the latter stages of COTM01). Which OS are you using? I've only tested on XP Pro and W2K.

using it on win2k (server). i wouldn't know if and where one can turn off application focus options.


got another problem with the 2.6.1 upgrade patch: it didn't work anymore with the AU503. it said "multiplayer is currently not supporter" or something like that. but AU scenarios aren't (yet) multiplayer... 2.6.0 works fine again...
 
sabrewolf said:
got another problem with the 2.6.1 upgrade patch: it didn't work anymore with the AU503. it said "multiplayer is currently not supporter" or something like that. but AU scenarios aren't (yet) multiplayer... 2.6.0 works fine again...
OK, I'll check into that. Could you send me a .sav?
 
You won't get embarrassed, it does it for me too :(. I can't resist having a quick look before going to bed (It's nearly 1AM here and I have to go to work tommorrow morning!), but a patch will take a little longer. Note that if you're reverting to 2.6.0 the notification doesn't work properly.
 
and because it couldn't load the files in 2.6.1, it couldn't notify at all ;)
oh well, as long as one ALT-tabs ;)
 
There's not much to it. The only gotcha is you might need to make sure the original 2.6.0 .msi file is still on your harddisk at the location you originally used to install it. The steps would be :
Make sure CRpSuite is not currently installed using add/remove programs.
Extract the CRpSuite260.msi file from the CRpSuite260.zip to your harddrive (Don't run the .msi directly).
Install 2.6.0 using the extracted CRpSuite260.msi.
Extract the CRpSuite261From260.msp file from the CRpSuite261From260.zip to your harddrive.
Install the 2.6.0 patch using the extracted CRpSuite261From260.msp.
Let me know if you have any problems Mistfit.

Ok just so I'm straight on this.
uninstall CRpSuite 1.6.0. off of my computer
Pull the .msi from the zip file add it to the hard drive where I just deleted it from
Install it from the hard drive
Pull the msp from the 2.6.1 file I downloaded and add it to the hard drive in the same location
install the patch from this location

does this sound right (I'd hate to mess up all of your hard work here)
 
Mistfit said:
does this sound right (I'd hate to mess up all of your hard work here)
Not sure about "add it to the hard drive where I just deleted it from" as you hadn't mentioned deleting it, but that should work, yes.
 
I've just created a patch to fix a number of bugs (:goodjob: thanks to those that reported these!). This is only available >>>here<<< (31Kb) as a patch to the 2.6.1 version (which is in turn a patch from the 2.6.0 version on my website).

New features in 2.6.2 :
  • CRpMapStat bug fixed causing no pollution notification.
  • CRpMapStat bug fixed causing trading view to shows civs that were dead.
  • General bug fixed causing single player .savs to be identified as multi-player.
 
What would be the difficulty in adding a PBEM or Multiplayer version or mode that will allow you to log in to the civ that you are playing as and only see what is available from that prespective? Also, what are the chances of adding an export to text feature? Which could take the data from the map stat and put in a text file? That would be useful for the Demo Game I'm in at GC.

What language is this in?
 
Any chance you can sort the columns? It would be nice to click on a column header and have it sorted ascending/decending.
 
CornMaster said:
What would be the difficulty in adding a PBEM or Multiplayer version or mode that will allow you to log in to the civ that you are playing as and only see what is available from that prespective? Also, what are the chances of adding an export to text feature? Which could take the data from the map stat and put in a text file? That would be useful for the Demo Game I'm in at GC.
All good suggestions CornMaster, and none of them that difficult. It's just a question of time. I only had about 1 hour to work on CRpSuite last month. Hopefully I'll have a bit more time this month, if I can finish CGOTM02 early, then I can work on some of the suggestions I've had (there have been quite a few recently as well as these!).



CornMaster said:
What language is this in?
It's written in C++. I'm using Borland Builder 6 for the GUI.



Turner_727 said:
Any chance you can sort the columns? It would be nice to click on a column header and have it sorted ascending/decending.
Yes. Which columns? Are there any in particular? I'm assuming you're talking about CRpMapStat. I've tried to make the columns in CRpMapStat be sorted in a sensible order by default.
 
Back
Top Bottom