Dancing Hoskuld
Deity
You can! Check out the multiplayer thread it should have something that tells you how to connect to each other. I believe the "default" method does not work.
v23 Bugs and Crashes
- Thread starter E_T
- Start date
- Status
You can! Check out the multiplayer thread it should have something that tells you how to connect to each other. I believe the "default" method does not work.
Dancing Hoskuld
Deity
Extremely unlikely it will work at all if limits occur in more than one civic CATEGORY. It was never really designed with that possibility in mind. I assume this is the case here or else the condition you cite could not arise...?
Dancing Hoskuld
Deity
I think I was fine building cities until I selected a civic in another catagory that also had limits. I will check it out. That would explain why the number of cities did not match the number on either civic.
NCC1017spock
Warlord
Where is this thread lol?
Dancing Hoskuld
Deity
Sorry, I did a search -> advance -> find threads with Mulitplayer in the title.
Tambien
Theseus, Duke of Athens
I can load the game and go through setup perfectly fine, but when it gets about halfway through loading the map Civ4 just disappears. No error message, no warning, just poof and it's no longer running.
I have tried reinstalling, reunzipping, restoring, and NOTHING WILL WORK! Please help. I want to play!
I have tried reinstalling, reunzipping, restoring, and NOTHING WILL WORK! Please help. I want to play!
99% of the time when this happens, it is because of a bad mapscript. Try another map and see if it does it.
Tambien
Theseus, Duke of Athens
I did. It still failed.
strategyonly
C2C Supreme Commander
No offense but needs alot more info than just "it does work." What are your PC specs?
Where do you have C2C (which folder?)
or any other pertinent info you can provide.
No offense but needs alot more info than just "it does work." What are your PC specs?
Where do you have C2C (which folder?)
or any other pertinent info you can provide.
Mindump
Hello Guys,
I hope this is the correct thread, since I am not sure, which version I got.
I found a reproducible error: While I was finishing an enemy civilization the game crashed and bumped me back to the desktop. I got no error messages.
I attached the save files. I think everything else should be obvious.
Maybe someone can help me out?
Thanks in advance.
Regards
I hope this is the correct thread, since I am not sure, which version I got.
I found a reproducible error: While I was finishing an enemy civilization the game crashed and bumped me back to the desktop. I got no error messages.
I attached the save files. I think everything else should be obvious.
Maybe someone can help me out?
Thanks in advance.
Regards
strategyonly
C2C Supreme Commander
JosEPh_II
TBS WarLord
Like SO showed but to upload the minidump it must be zipped, rar'ed or 7z'd 1st or the forum won't upload it.
JosEPh
JosEPh
Good morning,
yeah here in Germany it is 6 a.m.
I am sorry for forgetting to upload this file. Here it is.
Regards
Could you tell me which SVN revision this is. Regardless of wheer you got it from (including base V23 main install) this will display in the hover text for the flag near the bottom right of the game screen... (I need to know in order to interpret the minidump)
Hello,
well I am not completely sure, whether I got you right, but this is the information which pops up when I hower over the flag in the game screen (on the right site next to the map, right?):
BTS 3.19
C2C v24
Bull 1.3
C2C Build 2543
RoM 2.92
RDCM 2.8
BBTS AI: 1.01b
UP 3.19 v 1.50+
I hope this is what you are looking for?
Regards
Edit:
Interestingly now I could erase the civilization without any crash?
Kinda weired what happens here.
Uhm, maybe you still can find anything?
And there is one more question: I know for sure that I will get those nasty MAFs. My machine runs XP Prof (32bit) with 2GB ram. Can I still switch to 3GB or will than happen something dangerous? If I buy a new machine, which components does it need?
Maybe you can answer these questions here?
Regards.
well I am not completely sure, whether I got you right, but this is the information which pops up when I hower over the flag in the game screen (on the right site next to the map, right?):
BTS 3.19
C2C v24
Bull 1.3
C2C Build 2543
RoM 2.92
RDCM 2.8
BBTS AI: 1.01b
UP 3.19 v 1.50+
I hope this is what you are looking for?
Regards
Edit:
Interestingly now I could erase the civilization without any crash?
Kinda weired what happens here.
Uhm, maybe you still can find anything?
And there is one more question: I know for sure that I will get those nasty MAFs. My machine runs XP Prof (32bit) with 2GB ram. Can I still switch to 3GB or will than happen something dangerous? If I buy a new machine, which components does it need?
Maybe you can answer these questions here?
Regards.
Yes, the bit I bolded above is the key information
If you only have 2G RAM the /3G switch won't make any difference (it's harmless but won't help).Regards
Edit:
Interestingly now I could erase the civilization without any crash?
Kinda weired what happens here.
Uhm, maybe you still can find anything?
And there is one more question: I know for sure that I will get those nasty MAFs. My machine runs XP Prof (32bit) with 2GB ram. Can I still switch to 3GB or will than happen something dangerous? If I buy a new machine, which components does it need?
Maybe you can answer these questions here?
Regards.
I'm afraid I cannot interpret your minidump (see below), but especially if it doesn't always occur then it's extremely likely to be a running-out-of-memory issue.
The key thing you need to run C2C well is at least 4G memory. You can either buy more for your current machine, or (if it's too old for that to really be practical/sensible) make sure to get at least this much in any replacement (it's hard to get les than 4G these days I think if you buy anything new). Once you get at least that much RAM the next most important thing is a sufficiently capable graphics card (really any modern machine should be adequate, unless we're talking low end laptops maybe). After that CPU performance comes next, and finally disc performance (if you'er going high-end putting it on an SSD makes a significant load-time difference, if not then just avoid low-spin rate (5500) discs if possible.
@Thunderbrd - the reason his minidump is not readable is that when you uploaded the DLL for that revision you didn't also save the PDB in the 'DLL and PDB archives' folder, so we no longer have a matching PDB for it (which is necessary to read minidumps usefully)
Thank you for all that information and your "wasted" time on my problem.
Well, right at the moment, everything seems to be stable. I did not occur any new bugs since yesterday.
According to my machine: I think it would be worth waiting for a completely new system, although mine has some new parts, some are very old.
I am right that any let's say 'modern' but not high end machine should be enough? You see I am not that hardcore gamer.
Regards
Well, right at the moment, everything seems to be stable. I did not occur any new bugs since yesterday.
According to my machine: I think it would be worth waiting for a completely new system, although mine has some new parts, some are very old.
I am right that any let's say 'modern' but not high end machine should be enough? You see I am not that hardcore gamer.
Regards
Pretty much. Just so long as it has 4G RAM and basic gaming level graphics.
- Status
