Dancing Hoskuld
Deity
I loaded and played the save without problems.
When you did the update to the latest version you did not leave bits of the old version around in the folders did you? That sometimes causes this sort of problem.
Single Player bugs and crashes - After the 24th of February 2014
- Thread starter Dancing Hoskuld
- Start date
I loaded and played the save without problems.
When you did the update to the latest version you did not leave bits of the old version around in the folders did you? That sometimes causes this sort of problem.
Hydromancerx
C2C Modder
That's a horrible place to put the listening node. If its going to be that far down the tree at least put it at Terra Computer since that's where the Network Node currently is located at.
Is it from the tower mod?
Is it from the tower mod?
Dancing Hoskuld
Deity
It is in the tower mod but only because it was in the Total War mod. The towers in C2C don't do half the things the towers do there.
I play with the Version v34 (SVN Revision 7080) an i have massive errors like Memory Allocation Failure or ctds without any error message.
Its a fresh game and the Installation from Civ 4 is new (Have OS upgraded from Win 7 64 Bit to Windows 8.1). With the old Version v33 i had no Problems with MAF errors.
But now the errors occurs from begin of the game. I attach Logs, minidump and savegame.
When i load the last save, then i can play many Rounds, but the next crash comes surely.
Logs (minidump included):
Logs.7z
My Hardware:
CPU: AMD Phenom II X6 1100T (Thuban, PH-E0 (Pharaoh))
3300 MHz (16.50x200.0) @ 1707 MHz (8.50x200.9)
Motherboard: GIGABYTE GA-880GA-UD3H
Chipset: AMD RS880 + SB810/SB850
Memory: 16384 MBytes @ 669 MHz, 9.0-9-9-24
- 4096 MB PC10600 DDR3 SDRAM - G Skill F3-10666CL9-4GBRL
- 4096 MB PC10600 DDR3 SDRAM - G Skill F3-10666CL9-4GBRL
- 4096 MB PC10600 DDR3 SDRAM - G Skill F3-10666CL9-4GBRL
- 4096 MB PC10600 DDR3 SDRAM - G Skill F3-10666CL9-4GBRL
Graphics: ASUS ENGTX580
NVIDIA GeForce GTX 580, 1536 MB GDDR5 SDRAM
Drive: OCZ-AGILITY3, 250.1 GB, Serial ATA 6Gb/s @ 6Gb/s
Drive: WDC WD10EVVS-63M5B0, 976.8 GB, Serial ATA 3Gb/s
Drive: OCZ-AGILITY2, 58.6 GB, Serial ATA 3Gb/s
Drive: TSSTcorp DVDWBD SH-B123L, BD-ROM
Sound: NVIDIA GF110 - High Definition Audio Controller
Sound: Asus Xonar Phoebus
Network: RealTek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NIC
OS: Microsoft Windows 8.1 (x64) Build 9600
Its a fresh game and the Installation from Civ 4 is new (Have OS upgraded from Win 7 64 Bit to Windows 8.1). With the old Version v33 i had no Problems with MAF errors.
But now the errors occurs from begin of the game. I attach Logs, minidump and savegame.
When i load the last save, then i can play many Rounds, but the next crash comes surely.
Logs (minidump included):
Logs.7z
My Hardware:
CPU: AMD Phenom II X6 1100T (Thuban, PH-E0 (Pharaoh))
3300 MHz (16.50x200.0) @ 1707 MHz (8.50x200.9)
Motherboard: GIGABYTE GA-880GA-UD3H
Chipset: AMD RS880 + SB810/SB850
Memory: 16384 MBytes @ 669 MHz, 9.0-9-9-24
- 4096 MB PC10600 DDR3 SDRAM - G Skill F3-10666CL9-4GBRL
- 4096 MB PC10600 DDR3 SDRAM - G Skill F3-10666CL9-4GBRL
- 4096 MB PC10600 DDR3 SDRAM - G Skill F3-10666CL9-4GBRL
- 4096 MB PC10600 DDR3 SDRAM - G Skill F3-10666CL9-4GBRL
Graphics: ASUS ENGTX580
NVIDIA GeForce GTX 580, 1536 MB GDDR5 SDRAM
Drive: OCZ-AGILITY3, 250.1 GB, Serial ATA 6Gb/s @ 6Gb/s
Drive: WDC WD10EVVS-63M5B0, 976.8 GB, Serial ATA 3Gb/s
Drive: OCZ-AGILITY2, 58.6 GB, Serial ATA 3Gb/s
Drive: TSSTcorp DVDWBD SH-B123L, BD-ROM
Sound: NVIDIA GF110 - High Definition Audio Controller
Sound: Asus Xonar Phoebus
Network: RealTek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NIC
OS: Microsoft Windows 8.1 (x64) Build 9600
JosEPh_II
TBS WarLord
@Chaktor,
If v33 played fine with Win 7 64 why would you switch OS to Win 8.1 that has caused even some of the Modders problems?
Are you running the BtS and C2C mod as Administrator?
Are you "letting Windows" control your video performance and ram usage?
JosEPh
If v33 played fine with Win 7 64 why would you switch OS to Win 8.1 that has caused even some of the Modders problems?
Are you running the BtS and C2C mod as Administrator?
Are you "letting Windows" control your video performance and ram usage?
JosEPh
The mindump shows this crash happens in the Graphics Paging code. From the mindump i don't see why this would happen.
salvelinus
Chieftain
The game crash for this problem: 'ART_DEF_UNIT_NATIVE_WARLORD_MEDIEVAL' was not found. Help me for fix, please.
Many thanks for all.
Many thanks for all.
I have now deactivated the graphic paging in the BUG options. No error occured until now.
Thunderbrd
C2C War Dog
Sorry... got a bit overzealous with the withdrawal xp adjustment - it shouldn't be that penalizing for combat limit withdrawals. I'll address that when it becomes convenient to do so soon.
strategyonly
C2C Supreme Commander
Did you patch each one before moving on to the next, then turning off and on your PC for each also??
Latest patch and everything. And then downloaded C2C of the svn.
strategyonly
C2C Supreme Commander
I am talking about vanilla civ also, and then patch it to 1.6???, then restart your PC, then install BtS then patch (manually) 3.19, then restart again.
Schwarzbart
Prince
- Joined
- Jul 21, 2009
- Messages
- 528
Build 7077 (Started the game with this version and didn't update so fare)
I got the task to build 11 Trireme but because I already researched Bronze Working before I advanced to the next Age where I got this task its no longer possible for me to build this unit.
Also all captured city's have a huge (<-1000) negative Fire value.
Beside that I had NPC unit stacks that entered my territory and after I killed the first unit moved out of my territory and then left standing 1 field away from my territory for my Hero unit to kill them slowly.
I got the task to build 11 Trireme but because I already researched Bronze Working before I advanced to the next Age where I got this task its no longer possible for me to build this unit.
Also all captured city's have a huge (<-1000) negative Fire value.
Beside that I had NPC unit stacks that entered my territory and after I killed the first unit moved out of my territory and then left standing 1 field away from my territory for my Hero unit to kill them slowly.
strategyonly
C2C Supreme Commander
I have all siege weapons can can get and STILL i cant break down the defenses any further than 235??
Faustmouse
Deity
- Joined
- Jan 31, 2012
- Messages
- 3,524
Why can't you build Triremes anymore?
Dancing Hoskuld
Deity
There is a bug when you capture and raze a city - you do not get enough captives if your world view slavery is on,
Schwarzbart
Prince
- Joined
- Jul 21, 2009
- Messages
- 528
Because with Bronze Working they get replaced with a newer unit and unless you rush for the Ship Building tech that is requirement for Tireme you most likely will have Bronze Working before.
So unless there is some way, I don't know about, to build replaced units I can't build them any more.
Similar threads
- Sticky
- Sticky
